捆绑SM社区

捆绑SM社区.ca / Overview / Faculty of Engineering / Undergraduate / Programs

Mechanical Engineering (142 credits)

Offered by: Mechanical Engineering     Degree: Bachelor of Engineering

Program Requirements

Program credit weight: 142 credits

Program credit weight for Quebec CEGEP students: 113 credits

Program credit weight for out-of-province students: 142 credits

To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design engineering courses which include practice in design, manufacturing, and experimentation. In these courses, students learn how to apply their analytical groundwork to the solution of practical problems.

Special interests are satisfied by selecting appropriate complementary courses from among those offered with a specific subject concentration, such as management, industrial engineering, computer science, controls and robotics, bio-engineering, aeronautics, combustion, systems engineering, etc.

Required Year 0 Courses

29 credits

Generally, students admitted to Engineering from Quebec CEGEPs may be granted transfer credit for these Year 0 courses.

For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels, and Science Placement Exams, see and select your term of admission.

  • CHEM 110 General Chemistry 1 (4 credits)

    Offered by: Chemistry (Faculty of Science)

    Overview

    Chemistry : A study of the fundamental principles of atomic structure, radiation and nuclear chemistry, valence theory, coordination chemistry, and the periodic table.

    Terms: Fall 2024

    Instructors: Sirjoosingh, Pallavi; Kakkar, Ashok K; McKeague, Maureen; Denisova, Irina (Fall)

    • Fall

    • Prerequisites/corequisites: College level mathematics and physics or permission of instructor; CHEM 120 is not a prerequisite

    • Each lab section is limited enrolment

  • CHEM 120 General Chemistry 2 (4 credits)

    Offered by: Chemistry (Faculty of Science)

    Overview

    Chemistry : A study of the fundamental principles of physical chemistry.

    Terms: Winter 2025

    Instructors: Sirjoosingh, Pallavi; Sewall, Samuel Lewis; Wiseman, Paul; Denisova, Irina (Winter)

    • Winter

    • Prerequisites/corequisites: College level mathematics and physics, or permission of instructor: CHEM 110 is not a prerequisite

    • Each lab section is limited enrolment

  • MATH 133 Linear Algebra and Geometry (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Science)

    Overview

    Mathematics & Statistics (Sci) : Systems of linear equations, matrices, inverses, determinants; geometric vectors in three dimensions, dot product, cross product, lines and planes; introduction to vector spaces, linear dependence and independence, bases. Linear transformations. Eigenvalues and diagonalization.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Macdonald, Jeremy; Ayala, Miguel; Branchereau, Romain; Giard, Antoine (Fall) Pinet, Th茅o (Winter)

    • 3 hours lecture, 1 hour tutorial

    • Prerequisite: a course in functions

    • Restriction(s): 1) Not open to students who have taken CEGEP objective 00UQ or equivalent. 2) Not open to students who have taken or are taking MATH 123, except by permission of the Department of Mathematics and Statistics.

  • MATH 140 Calculus 1 (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Science)

    Overview

    Mathematics & Statistics (Sci) : Review of functions and graphs. Limits, continuity, derivative. Differentiation of elementary functions. Antidifferentiation. Applications.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Sabok, Marcin; Trudeau, Sidney; Kalmykov, Artem (Fall) Huang, Peiyuan; Trudeau, Sidney (Winter)

    • 3 hours lecture, 1 hour tutorial

    • Prerequisite: High School Calculus

    • Restriction(s): 1) Not open to students who have taken MATH139 or MATH 150 or CEGEP objective 00UN or equivalent. 2) Not open to students who have taken or are taking MATH 122, except by permission of the Department of Mathematics and Statistics.

    • Each Tutorial section is enrolment limited

  • MATH 141 Calculus 2 (4 credits)

    Offered by: Mathematics and Statistics (Faculty of Science)

    Overview

    Mathematics & Statistics (Sci) : The definite integral. Techniques of integration. Applications. Introduction to sequences and series.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Hassan, Hazem; Trudeau, Sidney; Zlotchevski, Andrei (Fall) Trudeau, Sidney; Poulin, Antoine; Syroka, Bartosz (Winter)

    • Prerequisites: MATH 139 or MATH 140 or MATH 150.

    • Restriction(s): Not open to students who have taken CEGEP objective 00UP or equivalent.

    • Restriction(s): Not open to students who have taken or are taking MATH 122,except by permission of the Department of Mathematics and Statistics.

    • Each Tutorial section is enrolment limited

  • PHYS 131 Mechanics and Waves (4 credits)

    Offered by: Physics (Faculty of Science)

    Overview

    Physics : The basic laws and principles of Newtonian mechanics; oscillations, waves, and wave optics.

    Terms: Fall 2024

    Instructors: Ragan, Kenneth (Fall)

    • Fall

    • 3 hours lectures; 1 hour tutorial, 3 hours laboratory in alternate weeks; tutorial sessions

    • Corequisite: MATH 139 or higher level calculus course.

    • Restriction(s): Not open to students who have taken or are taking PHYS 101, or who have taken CEGEP objective 00UR or equivalent.

    • Laboratory sections have limited enrolment

  • PHYS 142 Electromagnetism and Optics (4 credits)

    Offered by: Physics (Faculty of Science)

    Overview

    Physics : The basic laws of electricity and magnetism; geometrical optics.

    Terms: Winter 2025

    Instructors: Guo, Hong (Winter)

    • Winter

    • 3 hours lectures, 3 hours laboratory in alternate weeks; tutorial sessions

    • Prerequisite: PHYS 131.

    • Corequisite: MATH 141 or higher level calculus course.

    • Restriction: Not open to students who have taken or are taking PHYS 102, or who have taken CEGEP objective 00US or equivalent.

    • Laboratory sections have limited enrolment

AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies, and Law, listed below under Complementary Studies (Group B).

Note: FACC 100 (Introduction to the Engineering Profession) must be taken during the first year of study.

Required Non-Departmental Courses

33 credits

  • CIVE 207 Solid Mechanics (4 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Overview

    Civil Engineering : Stress-strain relationships; elastic and inelastic behaviour; performance criteria. Elementary and compound stress states, Mohr's circle. Shear strains, torsion. Bending and shear stresses in flexural members. Deflections of beams. Statically indeterminate systems under flexural and axial loads. Columns. Dynamic loading.

    Terms: Fall 2024, Winter 2025

    Instructors: Shao, Yi (Fall) Malomo, Daniele (Winter)

    • (4-2-6)

    • Prerequisites: CIVE 205 (a D grade is acceptable for prerequisite purposes) or MECH 210 (under special circumstances, the Department may permit this course to be taken as a corequisite) or equivalent

    • Four laboratory sessions and weekly tutorials

  • COMP 208 Computer Programming for Physical Sciences and Engineering (3 credits)

    Offered by: Computer Science (Faculty of Science)

    Overview

    Computer Science (Sci) : Programming and problem solving in a high level computer language: variables, expressions, types, functions, conditionals, loops, objects and classes. Introduction to algorithms such as searching and sorting. Modular software design, libraries, file input and output, debugging. Emphasis on applications in Physical Sciences and Engineering, such as root finding, numerical integration, diffusion, Monte Carlo methods.

    Terms: Fall 2024, Winter 2025

    Instructors: Langer, Michael; Pr茅mont-Schwarz, Isabeau (Fall) Pr茅mont-Schwarz, Isabeau; Zammar, Chad (Winter)

    • 3 hours

    • Corequisite: MATH 133 and MATH 141, or equivalents.

    • Restrictions: Not open to students who have taken or are taking COMP 202, COMP 204, orGEOG 333; not open to students who have taken or are taking COMP 206 or COMP 250.

    • COMP 202 is intended as a general introductory course, while COMP 208 is intended for students with sufficient math background and in (non-life) science or engineering fields.

  • ECSE 461 Electric Machinery (3 credits)

    Offered by: Electrical & Computer Engr (Faculty of Engineering)

    Overview

    Electrical Engineering : Electric and magnetic circuits. Notions of electromechanical energy conversion applied to electrical machines. Basic electrical machines - transformers, direct-current motors, synchronous motors and generators, three phase and single phase induction machines. Elements of modern electronically controlled electric drive systems.

    Terms: Winter 2025

    Instructors: Wang, Xiaozhe (Winter)

    • (3-1-5)

    • Restriction: Not open to students in Electrical Engineering.

    • Note: Tutorials assigned by instructor.

  • FACC 100 Introduction to the Engineering Profession (1 credit)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : Introduction to engineering practice; rights and code of conduct for students; professional conduct and ethics; engineer's duty to society and the environment; sustainable development; occupational health and safety; overview of the engineering disciplines taught at 捆绑SM社区.

    Terms: Fall 2024, Winter 2025

    Instructors: Frost, David (Fall) Chen, Lawrence (Winter)

    • (1.5-0-1.5)

  • FACC 250 Responsibilities of the Professional Engineer

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : A course designed to provide all Engineering students with further training regarding their responsibilities as future Professional Engineers. Particular focus will be placed on three professional characteristics that future engineers must demonstrate: i) professionalism, ii) ethical and equitable behaviour, and iii) consideration of the impact of engineering on society and the environment.

    Terms: Fall 2024, Winter 2025

    Instructors: Razavinia, Nasim (Fall) Razavinia, Nasim (Winter)

    • Prerequisite(s): FACC 100 or BREE 205

    • Restriction(s): Open to undergraduate students registered in the Bioengineering, Bioresource Engineering, Chemical Engineering, Civil Engineering, Computer Engineering, Electrical Engineering, Materials Engineering, Mechanical Engineering, Mining Engineering, and Software Engineering (Faculty of Engineering) programs. Not open to U0 (Year 0)students.

    • (0-0-0.5)

  • FACC 300 Engineering Economy (3 credits)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : Introduction to the basic concepts required for the economic assessment of engineering projects. Topics include: accounting methods, marginal analysis, cash flow and time value of money, taxation and depreciation, discounted cash flow analysis techniques, cost of capital, inflation, sensitivity and risk analysis, analysis of R and D, ongoing as well as new investment opportunities.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Jassim, Raad (Fall) Jassim, Raad (Winter) Jassim, Raad (Summer)

    • (3-1-5)

    • Restriction: Not open to students who have taken MIME 310.

  • FACC 400 Engineering Professional Practice (1 credit)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : Laws, regulations and codes governing engineering professional practice. Responsibility and liability. Environmental legislation. Project and organization management. Relations between engineer and client. Technical practice - analysis, design, execution and operation.

    Terms: Fall 2024, Winter 2025

    Instructors: Kirk, Andrew (Fall) Ozcer, Pinar (Winter)

    • (1.5-1-0.5)

    • Prerequisites: FACC 250 and [at least 60 program credits for B.Eng./B.S.E. students in the Faculty of Engineering or 45 program credits for B.Eng.(Bioresource) students].

    • Restriction: Not open to students who have taken MIME 221.

  • MATH 262 Intermediate Calculus (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Engineering)

    Overview

    Mathematics & Statistics (Sci) : Series and power series, including Taylor's theorem. Brief review of vector geometry. Vector functions and curves. Partial differentiation and differential calculus for vector valued functions. Unconstrained and constrained extremal problems. Multiple integrals including surface area and change of variables.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: B茅langer-Rioux, Rosalie; Khanfir, Robin; Madou, Kodjo (Fall) Roth, Charles (Winter)

    • (3-1-5)

    • Prerequisites: MATH 141, MATH 133 or equivalent.

    • Restrictions: Open only to students in the Faculty of Engineering. Not open to students who are taking or have taken MATH 151, MATH 152, OR MATH 222.

  • MATH 263 Ordinary Differential Equations for Engineers (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Engineering)

    Overview

    Mathematics & Statistics (Sci) : First order ODEs. Second and higher order linear ODEs. Series solutions at ordinary and regular singular points. Laplace transforms. Linear systems of differential equations with a short review of linear algebra.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Lin, Jessica; Martine, Gabriel (Fall) Trudeau, Sidney; B茅langer-Rioux, Rosalie (Winter)

    • (3-1-5)

    • Corequisite: MATH 262.

    • Restrictions: Open only to students in the Faculty of Engineering. Not open to students who are taking or have taken MATH 315 or MATH 325.

  • MATH 264 Advanced Calculus for Engineers (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Engineering)

    Overview

    Mathematics & Statistics (Sci) : Review of multiple integrals. Differential and integral calculus of vector fields including the theorems of Gauss, Green, and Stokes. Introduction to partial differential equations, separation of variables, Sturm-Liouville problems, and Fourier series.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Roth, Charles (Fall) Jakobson, Dmitry (Winter)

  • MATH 271 Linear Algebra and Partial Differential Equations (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Engineering)

    Overview

    Mathematics & Statistics (Sci) : Applied Linear Algebra. Linear Systems of Ordinary Differential Equations. Power Series Solutions. Partial Differential Equations. Sturm-Liouville Theory and Applications. Fourier Transforms.

    Terms: Fall 2024

    Instructors: Roth, Charles (Fall)

  • MIME 260 Materials Science and Engineering (3 credits)

    Offered by: Mining & Materials Engineering (Faculty of Engineering)

    Overview

    Mining & Materials Engineering : Structure properties and fabrication of metals, polymers, ceramics, composites; engineering properties: tensile, fracture, creep, oxidation, corrosion, friction, wear; fabrication and joining methods; principles of materials selection.

    Terms: Fall 2024, Winter 2025

    Instructors: Lee, Jinhyuk; Paray, Florence (Fall) Yue, Stephen; Paray, Florence (Winter)

    • (2-2-5)

  • WCOM 206 Communication in Engineering (3 credits)

    Offered by: 捆绑SM社区 Writing Centre (Faculty of Arts)

    Overview

    WCOM : Written and oral communication in Engineering (in English): strategies for generating, developing, organizing, and presenting ideas in a technical setting; problem-solving; communicating to different audiences; editing and revising; and public speaking. Course work based on academic, technical, and professional writing in engineering.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Baskind, Alana; Sundberg, Ross; Branco Cornish, Patricia; Besanger, Kendra; Sacks, Steven; Longman, Madelaine; Golish, Aaron; Babyn, Andr茅; Pathak, Kumar Sundaram; Hung, Yvonne; Valencourt, Quinn (Fall) Sundberg, Ross; Baskind, Alana; Valencourt, Quinn; Golish, Aaron; Branco Cornish, Patricia; Babyn, Andr茅; Sacks, Steven; Pathak, Kumar Sundaram (Winter) Sundberg, Ross (Summer)

    • Restriction: Not open to students who have taken CCOM 206. Only open to students in degree programs.

    • Limited enrolment.

    • Because this course uses a workshop format, attendance at first class is desirable.

* Note: FACC 100 (Introduction to the Engineering Profession) must be taken during the first year of study.

Required Mechanical Engineering Courses

65 credits

  • MECH 215 Statics (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Static equilibrium of particles and rigid bodies. Beams, trusses, frames and machines. Concept of potential energy and virtual work. Static equilibrium and stability. Systems of forces, moments and couples. Static equilibrium and stability of particles and rigid bodies. Free body diagrams: 2D and 3D analysis. Structures: beams, trusses, joints, frames and machines. Concept of work and energy. Centers of mass, centroids, moments of inertia, and parallel-axis theorem. Static friction.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • Prerequisites: PHYS 101 or PHYS 131 or equivalent

    • Restrictions: Not open to students who have taken or are taking MECH 210.

    • 3-1-5

  • MECH 220 Mechanics 2 (4 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Kinematics of particles and rigid bodies. Particle dynamics: force-momentum and work-energy approaches. Kinematics and kinetics of rigid bodies.

    Terms: Fall 2024, Winter 2025

    Instructors: Durandau, Guillaume (Fall) Nahon, Meyer (Winter)

  • MECH 241 Fundamentals of Thermodynamics (4 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Thermodynamic systems, properties, and state postulate. First law of thermodynamics: energy, work and heat. Properties of pure substances: phase change processes, property diagrams, property tables, and ideal gas model. Energy analysis of closed systems. Mass and energy analysis of control volumes: analysis of steady and transient engineering systems. Second law of thermodynamics: analysis of Carnot heat engines, refrigerators, and heat pumps. Entropy. Gas power cycles. Introduction to compressible flow.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • Restrictions: Not open to students who have taken or are taking MECH 240.

    • 4-2-6

  • MECH 262 Statistics and Measurement Laboratory (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Introduction to probability: conditional probability, binomial and Poisson distributions, random variables, laws of large numbers. Statistical analysis associated with measurements; regression and correlation. Basic experimental laboratory techniques, including the measurement of strain, pressure, force, position, and temperature.

    Terms: Fall 2024, Winter 2025

    Instructors: Nedic, Jovan (Fall) Nedic, Jovan (Winter)

    • (3-2-4)

    • Corequisite: MATH 263

    • Restriction: Open to U1 students or higher.

  • MECH 292 Design 1: Conceptual Design (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Introduction to design. Problem formulation, idea generation, feasibility study, preliminary design, design, analysis, design evaluation, project management, and optimal design.

    Terms: Fall 2024, Winter 2025

    Instructors: Morozov, Alexei V (Fall) Driscoll, Mark (Winter)

    • (3-1-5)

  • MECH 309 Numerical Methods in Mechanical Engineering (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Numerical techniques for problems commonly encountered in Mechanical Engineering are presented. Chebyshev interpolation, quadrature, roots of equations in one or more variables, matrices, curve fitting, splines and ordinary differential equations. The emphasis is on the analysis and understanding of the problem rather than the details of the actual numerical program.

    Terms: Fall 2024, Winter 2025

    Instructors: Forbes, James (Fall) Legrand, Mathias (Winter)

  • MECH 314 Dynamics of Mechanisms (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : First principles of analysis; motion; position; displacement; velocity; acceleration; force; inertia and its effects. Kinematic and dynamic analysis of rigid bodies in pure rotation and in pin-connected systems; dynamic balance. Rigid bodies in rolling contact; planetary gear-trains. Bodies in sliding contact; lower and higher sliding pairs.

    Terms: Fall 2024, Winter 2025

    Instructors: Raoofian, Ali (Fall) Raoofian, Ali (Winter)

  • MECH 315 Mechanics 3 (4 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Single-degree-of-freedom systems; free vibrations; effect of damping; response to harmonic, periodic and arbitrary excitation. Lagrange's equations of motion. Vibrations of multi-degree-of-freedom systems. Continuous systems.

    Terms: Fall 2024, Winter 2025

    Instructors: Mongeau, Luc (Fall) Mongeau, Luc (Winter)

  • MECH 321 Mechanics of Deformable Solids (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Modern phenomenological theories of the behaviour of engineering materials. Stress and strain concepts and introduction to constitutive theory. Applications of theory of elasticity and thermoelasticity. Introduction to finite element stress analysis method and its application to structural design of a machine element.

    Terms: Fall 2024, Winter 2025

    Instructors: Hubert, Pascal (Fall) Li, Jianyu (Winter)

  • MECH 331 Fluid Mechanics 1 (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Physical properties of fluids. Kinematics and dynamics of fluid flow: stress in a continuum, rates of strain, rotation. Control volume analysis; conservation of mass, linear momentum and energy; Euler and Bernoulli equations; Flow measurement. Dimensional analysis and dynamical similarity. Laminar and turbulent flow in pipes and boundary layers.

    Terms: Fall 2024, Winter 2025

    Instructors: Nadarajah, Sivakumaran (Fall) Lee, Timothy (Winter)

  • MECH 341 Thermodynamics 2 (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Generalized thermodynamics relations. Real gas effects, gas tables, dense gas equations of state and generalized compressibility, enthalpy, and entropy charts. Vapour and gas power cycles (coal/nuclear power plants). Refrigerators and heat pumps. Psychrometry and air conditioning processes. Thermodynamics of reactive gas mixtures.

    Terms: Fall 2024, Winter 2025

    Instructors: Habashi, Wagdi George (Fall) Caverly, Dylan; Frost, David (Winter)

  • MECH 346 Heat Transfer (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Basic concepts and overview. Steady and unsteady heat conduction. Fin Theory. Convective heat transfer: governing equations; dimensionless parameters; analogy between momentum and heat transfer. Design correlations for forced, natural, and mixed convection. Heat exchangers. Radiative heat transfer: black- and gray-body radiation; shape factors; enclosure theory. Thermal engineering design project.

    Terms: Fall 2024, Winter 2025

    Instructors: Mydlarski, Laurent B (Fall) Mydlarski, Laurent B (Winter)

  • MECH 360 Principles of Manufacturing (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Theory and practice of modern manufacturing processes: machining, forming, and casting. Producing parts using computer assisted tools from CAD to CNC machining followed by measurement of part quality. Hands-on machining of parts.

    Terms: Fall 2024, Winter 2025

    Instructors: Cao, Changhong (Fall) Cao, Changhong; He, Qianxi (Emily) (Winter)

  • MECH 362 Mechanical Laboratory 1 (2 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Experiments will be performed in four areas: MECH 240 Thermodynamics, MECH 315 Vibrations, MECH 331 Fluid Mechanics 1, and MECH 346 Heat Transfer. Students should sign up to do experiments in one or more areas the term following the completion of one or more of the above courses. Students will not formally register for this course until the term in which they will complete all of the experiments.

    Terms: Fall 2024, Winter 2025

    Instructors: Sabih, Amar (Fall) Sabih, Amar (Winter)

  • MECH 383 Applied Electronics and Instrumentation (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Discrete and integrated components, both analogue and digital. Characteristics of passive elements. Semiconductors, amplifiers, filters, oscillators, modulators, power supplies and nonlinear devices. Introduction to digital electronics. Transducer/signal conditioner interfacing considerations.

    Terms: Fall 2024, Winter 2025

    Instructors: Sedal, Audrey (Fall) Durandau, Guillaume (Winter)

  • MECH 393 Design 2: Machine Element Design (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : The design of machine elements for strength requirements in consideration of various methods of manufacture. Synthesis of mechanical systems to fulfill performance requirements, following the engineering design process. Static and fatigue failure prevention. Students form groups to work on a design project.

    Terms: Fall 2024, Winter 2025

    Instructors: Lessard, Larry (Fall) Pasini, Damiano (Winter)

  • MECH 412 System Dynamics and Control (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Modelling of physical linear time-invariant systems using transfer functions. Transient and steady-state response specifications. State space representation of systems. Frequency-response characterization. Stability. Feedback control systems. PID controller design. Root locus and frequency response design methods. Lead, lag and PID compensators.

    Terms: Fall 2024, Winter 2025

    Instructors: Sedal, Audrey (Fall) Nahon, Meyer (Winter)

  • MECH 430 Fluid Mechanics 2 (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Review of thermodynamics of gases, one dimensional isentropic flow and choking. Nozzles and wind tunnels. Normal shock waves. Flow in constant area ducts with friction and heat exchange. Compressible irrotational flow. Oblique shock waves and Prandtl-Meyer expansion. Supersonic aerofoil and wing theory.

    Terms: Fall 2024, Winter 2025

    Instructors: Timofeev, Evgeny (Fall) Higgins, Andrew J (Winter)

  • MECH 463D1 Design 3: Mechanical Engineering Project (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Team project work typically involving the design, fabrication, verification, and application of a mechanical device/system, or experimental facility. The project work is complemented with lectures in the Fall term on topics related to design and management of design projects. Emphasis is on the completion of a project of professional quality.

    Terms: Fall 2024

    Instructors: Driscoll, Mark; Sabih, Amar; Kokkolaras, Michael (Fall)

  • MECH 463D2 Design 3: Mechanical Engineering Project (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : See MECH 463D1 for course description.

    Terms: Winter 2025

    Instructors: Kokkolaras, Michael; Sabih, Amar; Driscoll, Mark; He, Qianxi (Emily) (Winter)

Technical Complementary Courses

9 credits

6 credits at the 300 level or higher, chosen from Mechanical Engineering courses (subject code MECH). One of these two courses (3 credits) must be from the following list:

  • CHEE 563 Biofluids and Cardiovascular Mechanics (3 credits) *

    Offered by: Chemical Engineering (Faculty of Engineering)

    Overview

    Chemical Engineering : Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • (3-0-6)

    • Prerequisites: CHEE 314 or MECH 331 or permission of instructor.

    • Restriction: Not open to students who have taken MECH 563.

  • MECH 415 Applied Solid Mechanics (4 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Modern phenomenological theories of the behaviour of engineering materials. Stress and strain concepts and introduction to constitutive theory. Applications of theory of elasticity and thermoelasticity. Introduction to finite element stress analysis methods. New version: Application of the theory of elasticity and thermoelasticity. Elements of plasticity, viscoelasticity, fracture, fatigue and creep. Composite Materials. Stress analysis using the method of finite elements.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 441 Applied Thermofluids (4 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Mechanical sources of energy: wind and hydro. Thermal sources of energy: nuclear, chemical, and solar. Vapor power cycles. Refrigeration and heat pumps. Energy storage. Energy Economics. Thermofluids engineering design project.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 497 Value Engineering (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Value Engineering is an in-depth analysis of an industrial product or process with a view to improving its design and/or performance to increase its worth. This is a workshop type of course. Projects will be supplied by industrial firms and students will work in teams with industrial personnel.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • (0-8-1)

    • Prerequisites: MECH 393 and completion of 45 credits

  • MECH 498 Interdisciplinary Design Project 1 (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Completion of an individual project on an interdisciplinary theme with emphasis on a balanced combination on analysis and synthesis.

    Terms: Fall 2024

    Instructors: Lee, Timothy (Fall)

    • (1-2-6)

  • MECH 499 Interdisciplinary Design Project 2 (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : The individual project initiated in MECH 498 is continued and finalized in this course.

    Terms: Winter 2025

    Instructors: Lee, Timothy; Caverly, Dylan (Winter)

  • MECH 513 Control Systems (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : State-space modelling and related linear algebra. Controllability and observability of linear time-invariant systems and corresponding tests, system realizations. Stability: Bounded-Input-Bounded-Output (BIBO), internal, Lyapunov. Linear state feedback control: pole placement and root locus design methods, linear quadratic regulator. State observers: full- and reduced-order designs, separation principle, Linear Quadratic Gaussian (LQG) design. Introduction to optimal control and optimal state estimation.

    Terms: Winter 2025

    Instructors: Forbes, James (Winter)

  • MECH 530 Mechanics of Composite Materials (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Fiber-reinforced composites. Stress, strain, and strength of composite laminates and honeycomb structures. Failure modes and failure criteria. Environmental effects. Manufacturing processes. Design of composite structures. Computer modelling of composites. Computer techniques are utilized throughout the course.

    Terms: Fall 2024

    Instructors: Lessard, Larry (Fall)

    • (3-0-6)

    • Corequisite: MECH 321 or equivalent/instructor's permission.

  • MECH 532 Aircraft Performance, Stability and Control (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Aircraft performance criteria such as range, endurance, rate of climb, maximum ceiling for steady and accelerated flight. Landing and take-off distances. Static and dynamic stability in the longitudinal (stick-fixed and stick-free) and coupled lateral and directional modes. Control response for all three modes.

    Terms: Winter 2025

    Instructors: Nahon, Meyer (Winter)

  • MECH 535 Turbomachinery and Propulsion (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Introduction to propulsion: turboprops, turbofans and turbojets. Review of thermodynamic cycles. Euler turbine equation. Velocity triangles. Axial-flow compressors and pumps. Centrifugal compressors and pumps. Axial-flow turbines. Loss mechanisms. Dimensional analysis of turbomachines. Performance maps. 3-D effects. Introduction to numerical methods in turbomachines. Prediction of performance of gas turbines.

    Terms: Fall 2024

    Instructors: Habashi, Wagdi George (Fall)

  • MECH 536 Aerospace Structures (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Aircraft and spacecraft structural components and loads. Bending, shear, torsion and buckling of thin-walled open and closed sections. Structural idealization. Principle of stiffener / web construction. Trusses and isogrid structures. Wing spars and box beams. Fuselage frames and wing ribs. Analysis of riveted, bolted and adhesive joints. Sandwich structures analysis. Thermoelasticity analysis for spacecraft structures.

    Terms: Fall 2024

    Instructors: Mruczek, Christopher (Fall)

    • (3-0-6)

    • Prerequisite: MECH 321 or equivalent

    • Restriction: Not open to students who have taken MECH 432.

  • MECH 543 Design with Composite Materials (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Material systems/selection process. Cost vs. performance. Laminate layup procedures. Theory and application of filament winding of composite cylinders. Regular oven and autoclave oven curing, analysis of resulting material performance. Practical design considerations and tooling. Analysis of environmental considerations. Joining techniques. Analysis of test methods. Theory of repair techniques.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 544 Processing of Composite Materials (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Composite processing science basic principles. Reinforcement properties; permeability, compaction. Resin properties; curing, viscosity, shrinkage. Heat transfer and cure kinetics; cure cycle optimization. Resin flow; infusion, thickness variations, fiber volume fraction distribution. Residual stresses; tool-part interaction, warpage control, spring-back, tool design. Thermoplastic composites; crystallization control, melting and consolidation.

    Terms: Winter 2025

    Instructors: Hubert, Pascal (Winter)

    • (3-0-6)

    • Prerequisite: MECH 530 or permission of instructor.

    • Restriction: This course requires the use of a finite element software, so experience with finite elements is recommended.

  • MECH 553 Design and Manufacture of Microdevices (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Introduction to microelectromechanical systems (MEMS). Micromachining techniques (thin-film deposition; lithography; etching; bonding). Microscale mechanical behaviour (deformation and fracture; residual stresses; adhesion; experimental techniques). Materials- and process-selection. Process integration. Design of microdevice components to meet specified performance and reliability targets using realistic manufacturing processes.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 559 Engineering Systems Optimization (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Introduction to systems-oriented engineering design optimization. Emphasis on i) understanding and representing engineering systems and their structure, ii) obtaining, developing, and managing adequate computational (physics- and data-based) models for their analysis, iii) constructing appropriate design models for their synthesis, and iv) applying suitable algorithms for their numerical optimization while accounting for systems integration issues. Advanced topics such as coordination of distributed problems and non-deterministic design optimization methods.

    Terms: Fall 2024

    Instructors: Kokkolaras, Michael (Fall)

  • MECH 560 Eco-design and Product Life Cycle Assessment (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Fundamentals of both product and process engineering with an emphasis on life cycle models and sustainability. Practical and theoretical topics, methodologies, principles, and techniques. Practical methods such as Life Cycle Analysis, eco-design strategies, streamlined Life Cycle Assessment, environmental impact assessment, and Life Cycle Engineering. Introduction to important product development theories and life cycle assessment theories.

    Terms: Winter 2025

    Instructors: Zhao, Yaoyao (Winter)

  • MECH 563 Biofluids and Cardiovascular Mechanics (3 credits) *

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices.

    Terms: Winter 2025

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • (3-0-6)

    • Prerequisites: CHEE 314 or MECH 331 or permission of instructor

    • Restriction: Not open to students who have taken CHEE 563

  • MECH 564 Thermal Radiation and Solar Energy Systems (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Fundamentals of thermal radiation. Black body thermal radiation. Radiative properties of real materials. Surface-to-surface radiation exchange. Radiation with conduction and convection. Radiation in absorbing, emitting and scattering media. Numerical methods to solve radiative transfer equation. Solar thermal energy systems. Solar collectors. Concentrating Solar Power (CSP) technology.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 565 Fluid Flow and Heat Transfer Equipment (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Pipes and piping systems, pumps, and valves. Fans and building air distribution systems. Basic thermal design methods for fins and heat exchangers. Thermal design of shell-and-tube and compact heat exchangers.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

  • MECH 573 Mechanics of Robotic Systems (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Manipulator performance and design. Pick-and-place and continuous-path operations. Computation of rigid-body angular velocity and acceleration from point-data measurements. Inverse kinematics of serial manipulators with coupled architectures; kinetostatics of multifingered hands and walking machines. Kinematics and dynamics of parallel manipulators and wheeled mobile robots.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • (3-0-6)

    • Prerequisite: MECH 309 or MATH 317, and MECH 572 or permission of the instructor.

    • Since the course is open to both undergraduate and graduate students, and B- is the minimum passing mark for graduate students, this minimum mark will be relaxed for undergraduates. The regulations applicable to undergraduates will apply accordingly.

* Students select either CHEE 563 or MECH 563.

3 credits chosen from courses at the 300 level or higher (approved by the Department) in the Faculty of Engineering (including MECH courses) or from courses in the Faculty of Science, including MATH courses.

Complementary Studies

6 credits

Group A - Impact of Technology on Society

3 credits from the following:

  • ANTH 212 Anthropology of Development (3 credits)

    Offered by: Anthropology (Faculty of Arts)

    Overview

    Anthropology : Processes of developmental change, as they affect small communities in the Third World and in unindustrialized parts of developed countries. Problems of technological change, political integration, population growth, industrialization, urban growth, social services, infrastructure and economic dependency.

    Terms: Winter 2025

    Instructors: Kraichati, Cyntia (Winter)

    • Winter

  • BTEC 502 Biotechnology Ethics and Society (3 credits)

    Offered by: Parasitology (Agricultural & Environmental Sciences)

    Overview

    Biotechnology : Examination of particular social and ethical challenges posed by modern biotechnology such as benefit sharing, informed consent in the research setting, access to medical care worldwide, environmental safety and biodiversity and the ethical challenges posed by patenting life.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • Restriction: U3 and over.

  • ECON 225 Economics of the Environment (3 credits)

    Offered by: Economics (Faculty of Arts)

    Overview

    Economics (Arts) : A study of the application of economic theory to questions of environmental policy. Particular attention will be given to the measurement and regulation of pollution, congestion and waste and other environmental aspects of specific economies.

    Terms: Fall 2024

    Instructors: Horner, Herv茅 Robert (Fall)

    • Restriction: Not open to students who have taken 154-325 or 154-425

  • ECON 347 Economics of Climate Change (3 credits)

    Offered by: Economics (Faculty of Arts)

    Overview

    Economics (Arts) : The course focuses on the economic implications of, and problems posed by, predictions of global warming due to anthropogenic emissions of greenhouse gases. Attention is given to economic policies such as carbon taxes and tradeable emission permits and to the problems of displacing fossil fuels with new energy technologies.

    Terms: Winter 2025

    Instructors: Cairns, Robert D (Winter)

    • Prerequisites: ECON 208 and ECON 209 or those listed under Prerequisites above

  • ENVR 201 Society, Environment and Sustainability (3 credits)

    Offered by: Bieler School of Environment (School of Environment)

    Administered by: Faculty of Science

    Overview

    Environment : This course deals with how scientific-technological, socio-economic, political-institutional and behavioural factors mediate society-environment interactions. Issues discussed include population and resources; consumption, impacts and institutions; integrating environmental values in societal decision-making; and the challenges associated with, and strategies for, promoting sustainability. Case studies in various sectors and contexts are used.

    Terms: Fall 2024

    Instructors: Badami, Madhav Govind; Cardille, Jeffrey; Garver, Geoffrey (Fall)

    • Fall

    • Section 001: Downtown Campus

    • Section 051: Macdonald Campus

  • GEOG 200 Geographical Perspectives: World Environmental Problems (3 credits)

    Offered by: Geography (Faculty of Science)

    Overview

    Geography : Introduction to geography as the study of nature and human beings in a spatial context. An integrated approach to environmental systems and the human organization of them from the viewpoint of spatial relationships and processes. Special attention to environmental problems as a constraint upon Third World development.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • Fall

    • 3 hours

  • GEOG 203 Environmental Systems (3 credits)

    Offered by: Geography (Faculty of Science)

    Overview

    Geography : An introduction to system-level interactions among climate, hydrology, soils and vegetation at the scale of drainage basins, including the study of the global geographical variability in these land-surface systems. The knowledge acquired is used to study the impact on the environment of various human activities such as deforestation and urbanisation.

    Terms: Fall 2024

    Instructors: Chmura, Gail L; MacDonald, Graham; Knox, Sara (Fall)

    • Fall

    • 3 hours

    • Restriction: Because of quantitative science content of course, not recommended for B.A. and B.Ed. students in their U0 year.

  • GEOG 205 Global Change: Past, Present and Future (3 credits)

    Offered by: Geography (Faculty of Science)

    Overview

    Geography : An examination of global change, from the Quaternary Period to the present day involving changes in the physical geography of specific areas. Issues such as climatic change and land degradation will be discussed, with speculations on future environments.

    Terms: Winter 2025

    Instructors: Chmura, Gail L (Winter)

    • Winter

    • 3 hours

  • GEOG 302 Environmental Management 1 (3 credits)

    Offered by: Geography (Faculty of Science)

    Overview

    Geography : An ecological analysis of the physical and biotic components of natural resource systems. Emphasis on scientific, technological and institutional aspects of environmental management. Study of the use of biological resources and of the impact of individual processes.

    Terms: Fall 2024

    Instructors: Harris, Sarah (Fall)

    • 3 hours

    • Prerequisite: Any 200-level course in Geography or MSE or BIOL 308 or permission of instructor.

  • MGPO 440 Strategies for Sustainability (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Management Policy : This course explores the relationship between economic activity, management, and the natural environment. Using readings, discussions and cases, the course will explore the challenges that the goal of sustainable development poses for our existing notions of economic goals, production and consumption practices and the management of organizations.

    Terms: Fall 2024, Winter 2025

    Instructors: Melville, Donald (Fall) Robitaille, Jad (Winter)

    • Restriction: Open to U2, U3 students only

  • PHIL 343 Biomedical Ethics (3 credits)

    Offered by: Philosophy (Faculty of Arts)

    Overview

    Philosophy : An investigation of ethical issues as they arise in the practice of medicine (informed consent, e.g.) or in the application of medical technology (in vitro fertilization, euthanasia, e.g.)

    Terms: Fall 2024

    Instructors: Hirose, Iwao (Fall)

  • RELG 270 Religious Ethics and the Environment (3 credits)

    Offered by: Religious Studies (Faculty of Arts)

    Overview

    Religious Studies : Environmental potential of various religious traditions and secular perspectives, including animal rights, ecofeminism, and deep ecology.

    Terms: Winter 2025

    Instructors: Chandler, Katie; Newing, Gregory (Winter)

  • SOCI 235 Technology and Society (3 credits)

    Offered by: Sociology (Faculty of Arts)

    Overview

    Sociology (Arts) : An examination of the extent to which technological developments impose constraints on ways of arranging social relationships in bureaucratic organizations and in the wider society: the compatibility of current social structures with the effective utilization of technology.

    Terms: Winter 2025

    Instructors: Wang, Skyler (Winter)

  • SOCI 312 Sociology of Work and Industry (3 credits)

    Offered by: Sociology (Faculty of Arts)

    Overview

    Sociology (Arts) : The development of the world of work from the rise of industrial capitalism to the postindustrial age. Responses of workers and managers to changing organizational, technological and economic realities. Interrelations between changing demands in the workplace and the functioning of the labour market. Canadian materials in comparative perspective.

    Terms: Winter 2025

    Instructors: Eidlin, Barry (Winter)

  • URBP 201 Planning the 21st Century City (3 credits)

    Offered by: Urban Planning (Faculty of Engineering)

    Overview

    Urban Planning : The study of how urban planners respond to the challenges posed by contemporary cities world-wide. Urban problems related to the environment, shelter, transport, human health, livelihoods and governance are addressed; innovative plans to improve cities and city life are analyzed.

    Terms: This course is not scheduled for the 2024-2025 academic year.

    Instructors: There are no professors associated with this course for the 2024-2025 academic year.

    • (3-1-5)

* Note: Management courses have limited enrolment and registration dates. See Important Dates at .

Group B - Humanities and Social Sciences, Management Studies, and Law

3 credits at the 200 level or higher from the following departments:

Anthropology (ANTH)

Economics (any 200- or 300-level course excluding ECON 227, and ECON 337)

History (HIST)

Philosophy (excluding PHIL 210 and PHIL 310)

Political Science (POLI)

Psychology (excluding PSYC 204 and PSYC 305, but including PSYC 100)

Religious Studies (RELG) (excluding courses that principally impart language skills, such as Sanskrit, Tibetan, Tamil, New Testament Greek, and Biblical Hebrew) ***

School of Social Work (SWRK)

Sociology (excluding SOCI 350)

OR one of the following:

  • ARCH 528 History of Housing (3 credits)

    Offered by: Architecture (Faculty of Engineering)

    Overview

    Architecture : Indigenous housing both transient and permanent, from the standpoint of individual structure and pattern of settlements. The principal historic examples of houses including housing in the age of industrial revolution and contemporary housing.

    Terms: Fall 2024

    Instructors: Adams, Annmarie (Fall)

    • (2-0-7)

    • Prerequisite: ARCH 251 or permission of instructor

  • BUSA 465 Technological Entrepreneurship (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Business Admin : Concentrating on entrepreneurship and enterprise development, particular attention is given to the start-up, purchasing and management of small to medium-sized industrial firms. The focal point is in understanding the dilemmas faced by entrepreneurs, resolving them, developing a business plan and the maximum utilization of the financial, marketing and human resources that make for a successful operation.

    Terms: Fall 2024, Winter 2025

    Instructors: An, Kwangjun (Fall) An, Kwangjun (Winter)

  • CLAS 203 Greek Mythology (3 credits)

    Offered by: History and Classical Studies (Faculty of Arts)

    Overview

    Classics : A survey of the myths and legends of Ancient Greece.

    Terms: Winter 2025

    Instructors: Kozak, Lynn (Winter)

  • ENVR 203 Knowledge, Ethics and Environment (3 credits)

    Offered by: Bieler School of Environment (School of Environment)

    Administered by: Faculty of Science

    Overview

    Environment : Introduction to cultural perspectives on the environment: the influence of culture and cognition on perceptions of the natural world; conflicts in orders of knowledge (models, taxonomies, paradigms, theories, cosmologies), ethics (moral values, frameworks, dilemmas), and law (formal and customary, rights and obligations) regarding political dimensions of critical environments, resource use, and technologies.

    Terms: Fall 2024, Winter 2025

    Instructors: Kosoy, Nicolas; Freeman, Julia (Fall) Hirose, Iwao; Janzwood, Amy (Winter)

    • Fall - Macdonald Campus; Winter - Downtown

    • Section 001: Downtown Campus

    • Section 051: Macdonald Campus

  • ENVR 400 Environmental Thought (3 credits)

    Offered by: Bieler School of Environment (School of Environment)

    Administered by: Faculty of Science

    Overview

    Environment : Students work in interdisciplinary seminar groups on challenging philosophical, ethical, scientific and practical issues. They will explore cutting-edge ideas and grapple with the reconciliation of environmental imperatives and social, political and economic pragmatics. Activities include meeting practitioners, attending guest lectures, following directed readings, and organizing, leading and participating in seminars.

    Terms: Fall 2024, Winter 2025

    Instructors: Kosoy, Nicolas; Freeman, Julia (Fall) Sieber, Renee; Horner, Herv茅 Robert; Janzwood, Amy (Winter)

    • Fall - Macdonald Campus; Winter - Downtown

    • Section 001: Downtown Campus

    • Section 051: Macdonald Campus

    • Prerequisite: ENVR 203

    • Restriction: Open only to U3 students, or permission of instructor

  • FACC 220 Law for Architects and Engineers (3 credits)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : Aspects of the law which affect architects and engineers. Definition and branches of law; Federal and Provincial jurisdiction, civil and criminal law and civil and common law; relevance of statutes; partnerships and companies; agreements; types of property, rights of ownership; successions and wills; expropriation; responsibility for negligence; servitudes/easements, privileges/liens, hypothecs/ mortgages; statutes of limitations; strict liability of architect, engineer and builder; patents, trade marks, industrial design and copyright; bankruptcy; labour law; general and expert evidence; court procedure and arbitration.

    Terms: Fall 2024

    Instructors: Crowe, Joshua (Fall)

    • (3-0-6)

  • FACC 500 Technology Business Plan Design (3 credits)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : This course combines several management functional areas such as marketing, financial, operations and strategy with the skills of creativity, engineering innovation, leadership and communications. Students learn how to design an effective and winning business plan around a technology or engineering project in small, medium or large enterprises.

    Terms: Fall 2024

    Instructors: Wong, Derrick (Fall)

    • (3-0-6)

    • Prerequisite: FACC 300 or permission of instructor.

    • Recommended to be taken in combination with FACC 501.

  • FACC 501 Technology Business Plan Project (3 credits)

    Offered by: Engineering - Dean's Office (Faculty of Engineering)

    Overview

    Faculty Course : Students work in teams to develop a comprehensive business plan project based on a technological or engineering innovation while utilizing site visits.

    Terms: Winter 2025

    Instructors: Wong, Derrick (Winter)

    • (1-0-8)

    • Prerequisite: FACC 300 or permission of instructor

    • Restrictions: Not open to students who have taken FACC 480.

    • Recommended to be taken in combination with FACC 500.

  • HISP 225 Hispanic Civilization 1 (3 credits)

    Offered by: Languages,Literatures,Cultures (Faculty of Arts)

    Overview

    Hispanic Studies (Arts) : A survey of historical and cultural elements which constitute the background of the Hispanic world up to the 18th century; a survey of the pre-Columbian indigenous civilizations (Aztec, Maya and Inca) and the conquest of America.

    Terms: Fall 2024

    Instructors: Jouve-Martin, Jose (Fall)

    • Fall

    • Taught in English

  • HISP 226 Hispanic Civilization 2 (3 credits)

    Offered by: Languages,Literatures,Cultures (Faculty of Arts)

    Overview

    Hispanic Studies (Arts) : A survey of the constitution of the ideological and political structures of the Spanish Empire in both Europe and America until the Wars of Independence; a survey of the culture and history of the Hispanic people from the early 19th Century to the present.

    Terms: Winter 2025

    Instructors: Jouve-Martin, Jose (Winter)

    • Winter

    • Taught in English

  • INDR 294 Introduction to Labour-Management Relations (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Industrial Relations : An introduction to labour-management relations, the structure, function and government of labour unions, labour legislation, the collective bargaining process, and the public interest in industrial relations.

    Terms: Fall 2024

    Instructors: Westgate, Chantal (Fall)

  • INTG 215 Entrepreneurship Essentials for Non-Management Students (3 credits) **

    Offered by: Management (Desautels Faculty of Management)

    Overview

    INTG : Fundamental concepts, theories, and practices of entrepreneurship. Focus on identifying opportunities, developing business ideas, and understanding key components of starting and managing a business.

    Terms: Fall 2024, Winter 2025

    Instructors: Aronovitch, Aviva (Fall) Aronovitch, Aviva (Winter)

    • Restrictions: Open to U1, U2, U3 non-Management students. Not open to students in the Desautels Faculty of Management.

    • Limited enrolment; priority registration for students in Minors in Entrepreneurship. Note: this course is not part of the Desautels Minor in Management for Non-Management students.

  • MATH 338 History and Philosophy of Mathematics (3 credits)

    Offered by: Mathematics and Statistics (Faculty of Science)

    Overview

    Mathematics & Statistics (Sci) : Egyptian, Babylonian, Greek, Indian and Arab contributions to mathematics are studied together with some modern developments they give rise to, for example, the problem of trisecting the angle. European mathematics from the Renaissance to the 18th century is discussed, culminating in the discovery of the infinitesimal and integral calculus by Newton and Leibnitz. Demonstration of how mathematics was done in past centuries, and involves the practice of mathematics, including detailed calculations, arguments based on geometric reasoning, and proofs.

    Terms: Fall 2024

    Instructors: Fortier, J茅r么me (Fall)

  • MGCR 222 Introduction to Organizational Behaviour (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Management Core : Individual motivation and communication style; group dynamics as related to problem solving and decision making, leadership style, work structuring and the larger environment. Interdependence of individual, group and organization task and structure.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Gordon, Sarah; Ody, Amandine; Blanchette, Simon (Fall) Mackey, Jeraul; Dakhlallah, Diana; Galperin, Roman; Findlay, Sylvia Miriyam (Winter)

  • MGCR 352 Principles of Marketing (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Management Core : Introduction to marketing principles, focusing on problem solving and decision making. Topics include: the marketing concept; marketing strategies; buyer behaviour; Canadian demographics; internal and external constraints; product; promotion; distribution; price. Lectures, text material and case studies.

    Terms: Fall 2024, Winter 2025, Summer 2025

    Instructors: Etemad, Hamid; Aronovitch, Aviva; Cyrius, Fabienne; Blanchette, Simon (Fall) Dor茅, Bruce; Zhao, Clarice (Winter)

  • ORGB 321 Leadership (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Organizational Behaviour : Leadership theories provide students with opportunities to assess and work on improving their leadership skills. Topics include: the ability to know oneself as a leader, to formulate a vision, to have the courage to lead, to lead creatively, and to lead effectively with others.

    Terms: Fall 2024, Summer 2025

    Instructors: Westgate, Chantal (Fall) Westgate, Chantal (Summer)

    • Prerequisite: MGCR 222 or permission of Instructor and approval of the BCom Program Office.

    • Restrictions: Restricted to U2 and U3 students.

  • ORGB 423 Human Resources Management (3 credits) *

    Offered by: Management (Desautels Faculty of Management)

    Overview

    Organizational Behaviour : Issues involved in personnel administration. Topics include: human resource planning, job analysis, recruitment and selection, training and development, performance appraisal, organization development and change, issues in compensation and benefits, and labour-management relations.

    Terms: Fall 2024

    Instructors: Gauvin, Tatiana (Fall)

    • Prerequisite: MGCR 222 or permission of the instructor and approval of the B.Com. Office.

    • Requirement for the Institute of Internal Auditors

* Note: Management courses have limited enrolment and registration dates. See Important Dates at .

** INTG 215 is not open to students who have taken INTG 201 and INTG 202.

*** If you are uncertain whether or not a course principally imparts language skills, please see an adviser in the 捆绑SM社区 Engineering Student Centre (Frank Dawson Adams Building, Room 22) or email an adviser.

Note regarding language courses: Language courses are not accepted to satisfy the Complementary Studies Group B requirement, effective for students who entered the program as of Fall 2017.

Typical Program of Study

Students entering the program from CEGEP follow a different course of study from those entering from out of province. Students will be advised by the Department as to which courses they should select from the course lists above.

For a detailed curriculum, see .
For all minors and concentrations, students should complete a Course Authorization Form, available from the 捆绑SM社区 Engineering Student Centre (Student Affairs Office) (Frank Dawson Adams Building, Room 22) or from the Undergraduate Program Coordinator, indicating their intention to take the minor or concentration.

Faculty of Engineering—2024-2025 (last updated Sep. 5, 2024) (disclaimer)
Back to top